The wireless Brother HL L3230CDW printer is a perfect choice for your workplace. It is easy to set up as it is designed with improvised features. Do check this page to know more about the printer setup. The Brother HL L3230CDW printer setup procedure begins with the unpacking process.
Since your printer comes with the toner cartridges preinstalled, open the top cover of your printer. You’ll find four drum unit and toner cartridge assemblies. Take them out.
Let us start loading the paper.
Loading the paper:
The Brother HL L3230CDW printer's paper tray holds up to 250 sheets of paper. Make sure that you do not overload the paper.
Now, set the basic settings, such as language, date, and time on your printer control panel.
The hardware setup is now complete. Proceed to the software installation.
The Brother HL L3230CDW printer comes with an installation disc. Using this disc, you can establish the communication between your computer and printer and perform the printer tasks. Or else, you can manually download the driver and software package from the official Brother website.
The printer driver is used to build communication between your printer and computer. Downloading the printer driver is pretty easy. You can now manually download the printer driver from the manufacturer’s website or obtain it from the installation disc. Otherwise, click the Driver Download button from our support page.
The printer driver can be installed onto your computer using the installation disc that came with your printer. Or else, download the printer driver from the official Brother website and install it.
After downloading the printer driver from the manufacturer’s website, check the following steps.
On your Windows computer, locate and double-click the downloaded file, and continue with the on-screen instructions.
When asked, choose the connection method. The available connection methods are:
Download the manual:
The Brother HL L3230CDW printer provides you with an online manual. Therefore, download it from the manufacturer’s website for any clarifications.
The wireless setup involves the process of connecting your Brother printer to the wireless network. It can be done in many methods. If you have a WPS-enabled wireless router, you can choose the WPS method to configure your Brother printer. Use your printer control panel setup wizard to easily configure the printer over the wireless network. With many available options, choose your preferred wireless configuration process.
In the Wi-Fi setup for Mac, you will have to connect your Brother printer to the same wireless network to which your Mac computer is connected.
The wireless setup for your Mac computer is now complete.
You can connect your printer with Wi-Fi Direct manually by following the steps given below.
Connecting Brother HL L3230CDW to Wi-Fi Direct:
Now, you’ve completed the Wi-Fi Direct network setup procedure.
You cannot perform a toner reset on your Brother HL L3230CDW printer. You can replace the toner when it is low. Here’s how to replace the toner.
Updating the firmware for your Brother printer is quite easy. Refer to the steps given below to update the firmware.
Troubleshooting the printer isn’t difficult. Though you have the best printer at your place, problems might arise while using it. Most importantly, you’ll have issues with toners, paper jams, or the printer might not function properly. Identify what causes the problem and clear out the root cause. Do check our support page for simple and easy solutions.
When you use the factory reset function, the printer restores all settings to the default factory ones. To begin with, make sure that you disconnect the interface cables.
If the Brother printer is not connecting to Wi-Fi, use the Network Connection Repair Tool.
It is important to check the printer’s network interface. Ensure that you’ve enabled the network interface.
If the LCD displays an error message related to toner, it indicates that the toner cartridge and drum unit assemblies are not installed properly. Now, you need to re-install the toner cartridge and drum unit assemblies to resolve this problem.
The above steps should fix the problem.
At times, the Brother HL L3230CDW printer troubles you with printing problems. The printer might stop printing. Don’t worry. Refer to the steps given below to fix this issue.
If the printer has stopped the printing operation, make sure that you delete all print jobs.
Deleting print jobs:
This should resolve the problem.
Check the printer driver settings. Here’s how to do it.
Verifying the printer driver settings:
The error code 43 appears on the LCD display due to the paper jam issue or because of printer malfunctioning. It indicates that you cannot print from your printer. Refer to the steps given below to resolve the issue.
We value our customers and provide 24/7 tech support. Valuable partnerships with (business name) start here. In case you have any queries, just let us know your trouble, and we will get back to you soon.